|
Design speed
|
100m/min
|
|
Economic speed
|
80m/min
|
|
Working width
|
1000-1800mm
|
|
Power requirements:
|
380V, 50Hz
|
|
Diameter of corrugated roller
|
280mm
|
|
Diameter of Press roller .
|
285mm.
|
|
Diameter of preheater roller
|
300mm
|
|
Diameter of Glue roller
|
215mm
|
|
Diameter of doctor roller
|
105mm
|
Machine Introduction
1.Adopt suction hood structure,matches strong high pressure blower.Suction with a silencer,air source and electrical control focus on the same operation counter,away from the motor is not less than 1.5m，operating side is closed full cover.
2.The base and wallboard use cast iron structure, the thickness of wallboard is 125mm.
3.With preheating and preconditioning rollers
4.Adopt steam spray device for adjust medium paper moisture
5..Frequency conversion motor as main drive,independent gear box connect with three gimbal axis; Gear adopt oil bath lubricating ; Inverter to make stepless speed regulation.
6.The upper and lower corrugated roller is made of 48 CrMo alloy steel, with heat treatment.The surface is well treated by grind and plated chrome, the hardness is above HRC60o.
7.Upper and lower corrugated roller are unit assemblage, the whole corrugated rollers group can be move and quick replacement,to change flute type quickly.
8.Pressure roller is made of 45 carbon steel,the surface is is well treated by grind and plated chrome.
9.Bearing for corrugated rollers and pressure roller adopt high-temperature lubricating grease to keep running smoothly and durably.
10.Corrugated roller is adjusted by pneumatic system with high stability;Pressure roller is adjusted by cylinder (with cushioning devices)
11.Glue section are unit assemblage, whole section can be moved by track, save maintenance time.
12.The glue roller surface are treated by special mesh embossed and chrome plated.
13.Supplying glue automatically and circularly.
14.Glue volume control with manual adjustment;Gap between glue roller and doctor roller is adjusted by manual.and that will be read out by Digital ;Glue width can be controlled by manual, electric can be choosed.
15.The glue section can operate non-independently when the motor stops.
16.Easy operation control system:touch screen,human-machine interface ,Drawing with color display,function selection,fault indication, and parameter settings.
